Cisco D9858 Installation And Configuration Manual page 313

Alarm Message
Type
Shutdown Set
Event
System Startup Set
SMI Setup Set
SMI Setup Set
SMI Setup Clear
SMI Setup Clear
Message Cause/Remedy
Watchdog 'AAA' Cause: Possible
has expired software issue.
Remedy: Clear
alarms, reset unit,
notify Cisco
Services if problem
persists.
System Startup Cause: The unit has
started up and it
indicates an
expected or
unexpected reset.
Remedy: If a
startup was
unexpected, check
for the last reset
cause. Notify Cisco
Services if problem
persists.
Phase lock error on Cause: Hardware
SMI SDRAM Issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if the
problem persists.
SMI SDRAM Cause: Hardware
exhaust test failed Issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if the
problem persists.
SMI SDRAM setup –
successful
SMI SDRAM –
exhaust test passed
Description Severity
Software Major
detected an
error in
operation.
Indicates that Major
the decoder
has started up.
This alarm
will clear itself
after one
second.
SDRAM on Major
SMI bus not
working.
SDRAM on Major
SMI bus not
working.
SDRAM on Major
SMI Bus OK.
SDRAM on Major
SMI Bus OK.
ID
20000
20100
21000
21000
21000
21000
291