Cisco D9858 Installation And Configuration Manual page 306

Chapter 6 Service and Maintenance
Alarm Message
Type
Shutdown Set
Event
Shutdown Set
Event
Shutdown Set
Event
Shutdown Set
Event
284
Message Cause/Remedy
User requested Cause: User request
requires reboot or
service restore
internal system
error.
Remedy: If it is an
internal system
error fault, clear
alarms, reset the
unit, notify Cisco
Services if the
problem persists.
PRODUCTION - Cause: User request
requires reboot or
Protect Flash
internal system
error.
Remedy: If it is an
internal system
error fault, clear
alarms, reset the
unit, notify Cisco
Services if the
problem persists.
I2C Failure Cause: Possible
software/hardware
issue.
Remedy: Clear
alarms, reset unit,
notify Cisco
Services if problem
persists.
WDOG: FPGA not Cause: Possible
software/hardware
loaded
issue.
Remedy: Clear
alarms, reset unit,
notify Cisco
Services if problem
persists.
Description Severity
Restore Major
operation
required
restart
Reboot after Major
production
tables
removed.
Internal Major
system error.
FPGA has not Major
been loaded.
ID
20000
20000
20000
20000