Cisco D9858 Installation And Configuration Manual page 344

Chapter 6 Service and Maintenance
Warning Message
Type
MPoIP Bitrate Clear
Port #<n>
Hardware Set
Platform
Hardware Clear
Platform
Network ID Set
Mismatch TS1
Network ID Clear
Mismatch TS1
D/R No Search Set
Path
322
Message Cause/Remedy
No active –
stream[s],
monitoring
stopped
Non-matching Cause: Non-matching
HW Platform. application was loaded
APP: <D9859 | through CDT download
D9854/58/24>, or FLASH
HW: <TMB2 |
programming.
HDR/TMB/HDR
Remedy: Replace the
2>
non-matching
application and reboot
the unit.
Matching –
Hardware
Platform
detected.
Original Network Cause: The NIT and SDT
ID in NIT and have different original
SDT mismatched network IDs.
Remedy: Additional
error details are
displayed in the log file.
Ensure that the uplink is
sending the same
original network ID in
SDT and in NIT.
Original Network –
ID in NIT and
SDT matched
No Search Cause: No tuning
configurations found in
Path:No Backups
the Disaster Recovery
Table, or only a single
backup location is found
in the Disaster Recovery
Table that matches the
origin.
Remedy: Contact your
PNC uplink
administrator.
Description
–
D9859 application is
running on the
D9854/D9858/D9824
platform or vice versa.
–
The original network
ID in NIT does not
match the original
network ID in SDT.
The original network
ID in NIT matches the
original network ID in
SDT.
The disaster recovery
search path cannot be
generated.
ID
92000
92100
94000
94000
98000
98000
99310