Cisco D9858 Installation And Configuration Manual page 314

Chapter 6 Service and Maintenance
Alarm Message
Type
LMI setup Set
LMI setup Clear
Param Storage Set
Param Storage Set
Param Storage Set
Param Storage Set
292
Message Cause/Remedy
LMI SDRAM Cause: Hardware
exhaust test failed issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if the
problem persists.
LMI Video SDRAM –
exhaust test passed
DB NVS flushing Cause: Hardware
ignored issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if the
problem persists.
RAM flush to NVS Cause: Hardware
failed issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if the
problem persists.
DB Factory Reset in Cause: Standard
progress operation.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if the
problem persists.
DB Total Reset in Cause: Standard
progress operation.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if the
problem persists.
Description Severity
DDR RAM on Major
LMI bus not
working.
DDR RAM on Major
LMI bus OK.
Non-volatile Major
storage system
failed to
update fully.
Non-volatile Major
storage system
failed to
update fully.
Non-volatile Major
storage system
operation in
progress.
Non-volatile Major
storage system
operation in
progress.
ID
22000
22000
23000
23000
23000
23000