Cisco D9858 Installation And Configuration Manual page 242

Chapter 5 Web GUI Setup and Monitoring
5 Click Apply.
6 Choose Transport Stream > Digital Program Mapping for ASI Output or
MPEG over IP Output. The ASI or MPEGoIP Digital Program Mapping page is
displayed.
7 In the DPM Program Entry Setup, click Resynchronize All. This copies the input
services PIDs to the remapped output service PIDs.
8 Select the PE containing the channel you want to configure and click Edit. The
DPM PE PID MAP window is displayed.
9 Click Add Row.
10 From the Action drop-down list, choose Drop or Map.
11 Choose the input to output channel mapping from the Category drop-down list.
Video and PCR can be output on the same PID or different PIDs. If output on the
same PID, they will appear identical to the input.
12 Click Save.
13 Click OK.
14 In the DPM General Setting area, set the following parameters:
Parameter
Remapping Mode
Duplication Method
Unreferenced Content
Service ID Output
PSI Table Output Option
PSI Regeneration Option
15 Click Table Options. The DPM Table Options window is displayed.
16 Set the following parameters:
Parameter
PAT
CAT
PMT
TSDT
NIT
NITO
SDT
SDTO
BAT
220
Description
Svc ID & PID
Pkt Copy
Drop
Valid Ch/All Ch
Ctl By Table
Always/As Needed
Description
Regen
Regen
Regen
Drop
Regen or Drop
Drop
Regen
Drop
Drop