Cisco D9858 Installation And Configuration Manual page 346

Chapter 6 Service and Maintenance
Warning Message
Type
D/R No DRT Clear
Received
D/R Invalid Set
Tuning
D/R Invalid Clear
Tuning
D/R Invalid L- Set
Band
D/R Invalid L- Clear
Band
324
Message Cause/Remedy
DRT Table –
Received
Invalid Tuning Cause: Any of the
for Backup (list of possible tuning
affected D/R validation failure
Backup reasons not described by
the other disaster
Transports)
recovery tuning
validation related
warnings (such as, a
tuner hardware failure).
Remedy: Export the
diagnostics file
(Support > Service
Action) and contact
Cisco Services.
warning cleared –
Invalid calculated Cause: Calculation of the
L-band frequency L-Band frequency
for Backup (list of cannot be completed
affected D/R based on the existing RF
Backup input and Backup
Transport tuning
Transports)
parameters.
Remedy: Contact your
PNC uplink
administrator to check
the tuning parameters
and RF Input LO
frequencies for the
identified disaster
recovery backup
transports.
cleared –
Description
The error is cleared
before disaster
recovery search path is
generated.
The disaster recovery
backup transport
failed tuning
validation due the
reasons that are
described in the
exported diagnostics
file (Support > Service
Actions). For more
information, see
Loading a Software
Version and License
(on page 268).
The error is cleared
before re-validating
the tuning.
The disaster recovery
backup transport
failed tuning
validation due to L-
Band calculation.
The error is cleared
before re-validating
the tuning.
ID
99330
99340
99340
99350
99350