Procedure Customize Data Log Display - Abbott CELL-DYN 3000 Operator's Manual

Chapter 5

Procedure Customize Data Log Display

CELL-DYN® 3000 System Operator's Manual
9140240E — May 1995
Search Book TOC
Group 1:
WBC
Group 2:
RBC
Group 3:
PLT
Group 4:
WBC
WBC
RBC
PLT
UMT1
SELECT
PARAMETER
Figure 5.44:
The display may be customized by selecting the individual parameters,
Standard Groups of parameters or a combination of the two. In addition
to the usual Hematologic parameters, the following parameters may also
be displayed in the Data Log:
UMT1 and UMT2 — UMT1 is the RBC/PLT Upper Metering Time.
CNT1 and CNT2 —
EMPTY —
1. From the main
LOG] to display the
Screen.
2. If necessary, press [CUSTOM PLACEMENT] to display the
CUSTOMIZE DISPLAY FOR DATA LOG Screen
labels for custom placement.
Go Back
CUSTOMIZE DISPLAY
Ready
FOR DATA LOG
NEU LYM MONO EOS
HGB HCT MCV MCH MCHC RDW
MPV PCT PDW
%N %L %M %E
NEU LYM MONO EOS
HGB HCT MCV MCH MCHC RDW
MPV PCT PDW
%N %L %M %E
UMT2 CNT1 CNT2
Customize Display for Data Log Screen
UMT2 is the RBC/PLT Upper Metering Time for
an extended count.
CNT1 is the RBC/PLT Count Time. CNT2 is the
RBC/PLT Count Time for an extended count.
Inserts an empty column in the display.
DATA LOG Screen, press [CUSTOMIZE DATA
CUSTOMIZE DISPLAY FOR DATA LOG
Operating Instructions
Dec 18 1992 10:57
Operator ID 734
Sequence # 0630
BASO
%B
BASO
%B
EMPTY
STANDARD CUSTOMIZE RETURN
GROUPS PRINTOUT
and key
5-113