Abbott CELL-DYN 3000 Operator's Manual page 193

Operating Instructions
ELECTRICL
BACKGRND
LATEX
5-64
Search Book TOC
Type ELEC BKGND
Param Set: 1
WBC: K/uL
NEU: %N
LYM: %L
MONO: %M
EOS: %E
BASO: %B
RBC: M/uL
HGB: g/dL
HCT: %
MCV: fL
MCH: pg
MCHC: g/dL
RDW: %
PLT: K/uL
MPV: fL
CLEAR WORK SPECIMEN
ORIFICE LIST TYPE
Figure 5.32:
The [ELECTRICL BACKGRND] key is used to select the run mode
for Electrical Background Counts and display the RUN Screen for them.
(See Figure 5.32.) Electrical backgrounds are used to check for electrical
interference in the system. (Aperture current is turned OFF during this
cycle.) Results from this run option are identified by the designation
ELEC BKGND in the data log and are automatically excluded from the
X-B analysis.
The [LATEX] key is used to select the run mode for latex particles and
display the RUN Screen for them. This key is used by Abbott service
personnel.
Go Back
RUN
Ready
S
I
Z
E
COMPLEXITY
PLT
CUSTOMIZE CHANGE
REPORT SAMPLER
Run Screen for Electrical Background Counts
Dec 18 1992 09:52
Operator ID 734
Sequence # 0630
Open Sampler
D
E
P
O
L
ORTHOGONAL
RBC
PRINT PRINT
TICKET REPORT
CELL-DYN® 3000 System Operator's Manual
9140240E — May 1995
Chapter 5
MAIN