Procedure Customize Qc Log Display - Abbott CELL-DYN 3000 Operator's Manual

Chapter 5

Procedure Customize QC Log Display

CELL-DYN® 3000 System Operator's Manual
9140240E — May 1995
Search Book TOC
On the CUSTOMIZE QC DISPLAY
displayed (in the order indicated from left to right) on the first VIEW
QC LOG Screen. The remaining groups are displayed on subsequent
screens that are accessed by pressing the Right Arrow key on the
keyboard. The Left Arrow key is used to page back through the screens
to the first screen.
The [STANDARD GROUPS] key is used to select a predetermined
group of parameters that will be placed on a designated page. The
display may be customized by selecting the individual parameters,
standard groups of parameters or a combination of the two.
1. Select a file from the
cursor to the desired file.
2. Press [CUSTOMIZE DISPLAY] to display the
QC DISPLAY Screen
3. If necessary, press [CUSTOM PLACEMENT] to display the
CUSTOMIZE QC DISPLAY Screen
PARAMETER] key.
4. Use the Arrow keys on the keyboard to move the cursor to the
desired parameter in the listing under the matrix.
5. Press [SELECT PARAMETER]. The selected parameter is
highlighted and the cursor moves to the first position in Group 1.
NOTE: The key label changes to [PLACE PARAMETER]
and a [CANCEL SELECTION] key is displayed.
6. If necessary, use the Arrow keys on the keyboard to move the
cursor to the desired location and press [PLACE PARAMETER].
NOTE: When the [PLACE PARAMETER] key is pressed, the
selected parameter is displayed in the position indicated by the
cursor and the cursor is then advanced to the next parameter in
the listing under the matrix.
7. Repeat steps 4–6 until all selections have been made.
8. If desired, press the Print Screen key on the keyboard to obtain a
printout of the selected groups.
9. Press [RETURN] to return to the
10. Repeat this procedure to customize the display for other QC logs.
Operating Instructions
Go Back
Screen, Parameter Group 1 is
QC SETUP MENU Screen
for the selected file.
and the [SELECT
QC SETUP MENU
by moving the
CUSTOMIZE
Screen.
5-25