Sample Loader Operation Keyboard Keys - Abbott CELL-DYN 3000 Operator's Manual

Hide thumbs Also See for CELL-DYN 3000:

Table of Contents

Sample Loader Operation Keyboard Keys

CELL-DYN® 3000 System Operator's Manual

9140240E — May 1995

Figure 12.5:

Operation Keyboard

The operator controls the Sample Loader using the operation keyboard.

See Figure 12.5.

Primary Keys

The primary Sample Loader keys are:

INIT—Initiates the initialization cycle. This key appears after the

[RESET] key is pressed.

START—Initiates processing whenever the CELL-DYN 3000SL is in the

closed mode READY state.

PAUSE—Pauses processing after the current cycle is completed. This

key is used any time the processing needs to be interrupted.

REPEAT—Moves the sample back to the mixing station and remixes it

prior to re-aspiration.

RESET—Resets the Sample Loader and activates the INIT key, usually

in conjunction with an activated alarm situation.

E/STOP (emergency stop)—Terminates processing immediately. Any

sample being processed when this key is pressed must be repeated.

Sample Loader