Abbott CELL-DYN 3000 Operator's Manual page 221

Operating Instructions
5-92
Search Book TOC
When a laboratory-generated bar code number is used (Laboratory
Specimen ID option selected in the Work List Set Up), this number must
be typed in the Work List <SPECIMEN ID> field. The samples are
identified on the Data Station RUN Screen
number.
When a CELL-DYN 4-digit bar code label is used (4-digit bar code
option selected in the Work List Set Up), the 4-digit number must be
entered in the Work List <4-DIGIT BAR CODE> field, and a specimen
ID number must be entered in the Work List <SPECIMEN ID> field.
Samples are identified on the
Log by the information entered in the Work List <SPECIMEN ID> field
for that 4-digit bar code number.
The Work List is accessed randomly as the samples are processed.
Sample identification is made by matching the bar code number on the
tube to the information entered in the Work List for that bar code number.
The Work List information is used to identify the sample on the
Station RUN Screen and in the Data Log.
NOTE: Special "Q Labels" are available to identify QC
samples. QC samples should not be entered in the Work List.
The Q label identifies the sample as a QC sample and the results
are automatically transmitted to the appropriate file.
Sample Analysis Procedure
1. Follow the instructions in the
configure the Work List.
2. If necessary, from the main
LIST ON] to enable the Work List.
3. If necessary, press [BAR CODE ON] to enable the bar code
function.
4. When a laboratory-generated bar code label is used, the bar code
number must be entered in the <SPECIMEN ID> entry field.
NOTE: When the CELL-DYN 4-digit bar code label is being
used, type the number in the <4-DIGIT BAR CODE> entry
field. When data entry is completed for the entry fields on that
line and the Enter key is pressed, the cursor returns to the next
<4-DIGIT BAR CODE> entry field and the number
automatically increments by one digit. The cursor remains in this
field until the Enter key is pressed again to save the entries and
advance the cursor.
Go Back
and in the Data Log by this
Data Station RUN Screen
Work List Set Up Procedure
WORK LIST Screen, press [WORK
CELL-DYN® 3000 System Operator's Manual
9140240E — May 1995
Chapter 5
and in the Data
Data
to