Procedure Reagent Log Entry; Procedure Deleting Entries - Abbott CELL-DYN 3000 Operator's Manual

Chapter 5

Procedure Reagent Log Entry

Procedure Deleting Entries

CELL-DYN® 3000 System Operator's Manual
9140240E — May 1995
Search Book TOC
When the [REAGENT LOG] key is pressed, one of the logs is displayed
as shown in Figure 5.5. (The name of the displayed log is indicated in the
Status Box). The other two logs may be displayed by pressing the
appropriate soft key. Each log holds 10 entries. The following
information may be entered for each reagent:
Package Size
Expiration Date
1. From the SETUP
REAGENT LOG
2. Use the soft key to select the appropriate reagent log if it is not
displayed.
3. Use the Arrow keys on the keyboard to move the cursor to the
desired entry field.
4. Type the appropriate information.
NOTE: Entries for each field of information are optional. Dates
should be entered with a slash (/) or a period (.) separating the
month, day and year.
5. Press the Enter key on the keyboard to save the entry and advance
the cursor.
6. Repeat steps 3–5 until all desired entries have been made.
7. If desired, press [PRINT LOG] to obtain a printout of the log.
8. Press the appropriate soft key to select another reagent log and
repeat steps 2–7 to enter data.
When the log is full (the log holds 10 entries), any new entry will replace
the oldest entry. Print the logs when they are full for documentation
purposes.
1. From the SETUP
REAGENT LOG
2. Move the cursor to the oldest entry in the log.
3. Press [DELETE ENTRY]. The [COMPLETE DELETION] and
[RESTORE ENTRY] keys are displayed.
Operating Instructions
Go Back
Lot Number
Open Date
MENU, press [REAGENT LOG] to display a
Screen.
MENU, press [REAGENT LOG] to display a
Screen.
5-11