Garmin Mode Configuration; Settings; Firmware Configuration - Teltonika FM6320 User Manual

11.4.7 Garmin Mode Configuration

11.4.7.1 Settings

1. External Devices ->COM2 Settings->Baudrate = 9600
2. External Devices ->COM2 Settings->Mode = Garmin
3. External Devices ->COM2 Settings->Parity = None
Ping Filter Enable Parameter:
Unicode Support Packet Enable Parameter:

11.4.7.2 Firmware Configuration

Supported Garmin protocols: A***
(http://developer.garmin.com/lbs/fleet-management/fmi-protocol-support-matrix/)
Blocked Garmin ID's:

Command 0A

Date/Time Data 0E

Unit ID/ESN 26

Pvt Data 33

Legacy Stop Message 87

Legacy Text Message 88

Ping 0260

Ping response 0261

Product ID Request 0001

Product ID Data 0002
FM send ACK the these packets, ant these packets are not sent to server to reduce traffic.
Allowed Garmin ID's:

ACK 06

NAK 15

Fleet Management Packet A1
Note:
If packet are not listed here packet ID will be ignored.
0 - [DISABLED] = Ping packet will not blocked.
1 - [ENABLED] = Ping packet will be blocked.
0 - [DISABLED] = Unicode Packet will be send to server.
1 - [ENABLED] = Unicode Support Packet will not be send to server.
85