Getparam; Setparam; Flush - Teltonika FM6320 User Manual

12.17

getparam ####

Read parameter value. ID consists of 4 digits – first digit identifies profile, second, third and
fourth identifies parameter ID as described in Parameters Configuration chapter.
Table 48 getparam ####
Response details Description
ID Profile number and parameter ID
Value Parameter value
Example: 'getparam 1245' command will request server IP address in profile1.
12.18

setparam #### #

Sets new value for parameter. ID consists of 4 digits – first digit identifies profile, second,
third and fourth identifies parameter ID as described in Parameters Configuration chapter. In
value field a new parameter value is entered.
Example: 'setparam 1245 127.0.0.1' will change configured IP address in profile1 with new
value
12.19

flush #,#,#,#,#,#,#

Initiates all data sending by GPRS to specified target server. Comma separated parameters
go as numbered:
1.# - IMEI
2.# - APN
3.# - GPRS LOGIN
4.# - GPRS PASSWORD
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
Parameters are separated by comma (no spaces needed). In case you do not need to enter
parameter (Login/Pass) – do not put space, simply put comma and write next parameter.
Example: opa opa flush 353976012555151,banga,,,212.47.99.62,12050,0
93