Table of Contents
Advertisement
16.1 Supported Garmin FMI Protocols
The following is a list of protocols supported and the corresponding feature/benefit.
FM6320 can fully support Fleet Management Interface (FMI) versions up to 2.1. Other or higher
versions may be supported, but Teltonika is not responsible for the changes made by Garmin,
which may affect the work of FM6320 and Garmin products. For more information about Garmin
products
and
http://www8.garmin.com/solutions/pnd/supportedproducts.jsp. Notice that some Garmin
products use different connection cables than others.
16.1.1 Standard protocols
Text Message Protocol:
• Allows text messages sent to device to be displayed in "inbox" on unit.
• Garmin can provide confirmation that message was read.
• Garmin can also provide a yes/no box below the text of the message to enable a simple
quick response.
• Messages can be up to 199 characters in length.
• Messages can also be generated from device and sent to dispatch/office.
• Messages received will be notified to driver through a pop-up alert on Garmin screen.
• Garmin provides a "virtual keyboard" on device through a touch-screen format for all text
communication.
Stop (Destination) Protocol:
• Garmin can display a list of Stops/Jobs reported to the device in a separate icon called
"My Stops".
• Driver has ability to navigate directly to Stop from list.
• Garmin can provide status on current Stop in progress.
• Is driver stopped at location?
• How far has Driver progressed through the list of Stops?
• Garmin can also provide confirmation that driver has received a particular Stop, read the
details, or deleted it from list.
• Can provide confirmation that a Stop has been completed.
Figure 69 FM6320+Garmin operational scheme
FMI
versions,
please
go
to
125
Advertisement
Table of Contents
