Table of Contents
Advertisement
Authorized Driving Scenario. Gives ability to use vehicle for 500 specific iButton owners
(specified in iButton list). Any DOUT (which is configured) is controlled by scenario for user
needs, to manage buzzer, LED etc.
Immobilizer Scenario. Vehicle can be used only if iButton is connected. In this scenario
iButton list is not used - connect any iButton to pass Immobilizer security. Any DOUT (which is
configured) is controlled by scenario for user needs. DOUTX is continuously OFF. DOUTX turns
ON if Ignition turns ON (Din1=1). After iButton ID is read (any iButton is attached), DOUTX
turns OFF. After iButton identification DIN1 (ignition) can be turned OFF (Din1=0) for no
longer than 30 seconds, otherwise immobilizer must be repeated.
Excessive idling. If ignition (DIN1 or Power Voltage) is on and vehicle is not moving,
FM6320 after configured time period generate event. When vehicle starts moving FM6320 after
configured time period generate event that vehicle idle time ends.
Note: Authorized Driving and Immobilizer Scenarios are combined into a single
scenario.
Note: All scenarios can be activated at the same time and one DOUT can
control all scenarios.
5.6.2 Trip
Trip customizable feature enables user extended monitoring of performed trips (from
engine start at present location to engine stop at arrived location), log their start and stop points,
view driven total distance. Event will be generated (included into send records) only when trip
starts and finishes.
5.6.3 Geofencing
Geofencing is another feature which is highly customizable and can detect wherever a car
enters or leaves customized areas. More about Geofencing can be read in chapter 6.3.1.3.4 .
5.6.4 Auto Geofencing
Auto Geofencing feature, if enabled, is activated automatically by turning off car ignition.
Next time before driving user has to disable Auto Geofencing with iButton or by turning on car
ignition. In case of theft, the car leaves Auto Geofencing zone without authorization and FM6320
device automatically sends high priority record to AVL application.
5.6.5 iButton list
IButton list is used to enter authorized iButton ID codes, which are used to authenticate
driver in Authorized driving and Auto Geofencing options.
28
Advertisement
Table of Contents
