Autocan Configuration Over Sms; Sms Command Format; If We Wanted To Configure Fm6320 To Make A Panic Event Everytime Brake Pedal Is Either Pushed Or Released, The Sms We Would Have To Send Is - Teltonika FM6320 User Manual

13.5 AutoCAN Configuration over SMS

13.5.1 SMS command format:

"<login><space><password><space>setparam<space><profile number><Element
ID><space><Element format>"
if there is no login and password configured in FM configuration, 2 spaces must be used
before command :
<space><space><command>.
Element format: <SendDataToServer>,<HighLevel>,<LowLevel>,<DataAcquisitionType>
Element format values:
For example: <space><space>setparam 3347 2,70,50,3
Here we set FM6320 to make a high priority event once the FM6320 either reaches higher than
70km/h speed or starts going lower than 50km/h.
If we wanted to configure FM6320 to make a panic event everytime brake pedal is either pushed
or released, the SMS we would have to send is:
<space><space>setparam 3346 3,0,0,1 (here we skip HighLevel and LowLevel so we write 0)
<[0-7]>,<int32>,<int32>,<[0-5]>
118