Table of Contents
Advertisement
Indicates the tachograph performance; including electronic or mechanical analysis, instrument
analysis, speed sensor analysis, mass storage analysis, and printer analysis.
00 – Normal performance
01 – Performance analysis
10 – Error
11 – Not available
Data Length: 2 bits
Resolution: 4 states/2 bit, 0 offset
Data Range: 0 to 3 Operational Range: same as data range
Type: Status
Supporting information:
PGN 65132
Note: Firmware captures all values [0x00-0x03].
Handling information:
Indicates that handling information is present. Information could include "no printer paper", "no
driver card", etc.
00 – No handling information
01 – Handling information
10 – Error
11 – Not available
Data Length: 2 bits
Resolution: 4 states/2 bit, 0 offset
Data Range: 0 to 3 Operational Range: same as data range
Type: Status
Supporting information:
PGN 65132
Note: Firmware captures all values [0x00-0x03].
System event:
Indicates that a tachograph event has occurred. This may include power supply interruption,
interruption of the speed sensor, incorrect data on the driver card, driving without a driver card,
illegal removal of a driver card, insertion of a driver card during driving, and time adjustment.
00 – No tachograph event
01 – Tachograph event
10 – Error
11 – Not available
Data Length: 2 bits
Resolution: 4 states/2 bit, 0 offset
Data Range: 0 to 3 Operational Range: same as data range
Type: Status
Supporting information:
PGN 65132
Note: Firmware captures all values [0x00-0x03].
Tachograph vehicle speed:
Speed of the vehicle registered by the tachograph.
Data Length: 2 bytes
115
Advertisement
Table of Contents
