Table of Contents
Advertisement
PTO state information:
This parameter is used to indicate the current state or mode of operation by the power takeoff
(PTO) governor. In lieu of support for PTO Drive Engagement parameters, this parameter may
represent the status of a PTO drive. The broadcasting device must ensure that each achieved
state is conveyed in at least one message broadcast before a transition to another state is
allowed.
00000 Off/Disabled
00001 Hold
00010 Remote Hold
00011 Standby
00100 Remote Standby
00101 Set
00110 Decelerate/Coast
00111 Resume
01000 Accelerate
01001 Accelerator Override
01010 Preprogrammed set speed 1
01011 Preprogrammed set speed 2
01100 Preprogrammed set speed 3
01101 Preprogrammed set speed 4
01110 Preprogrammed set speed 5
01111 Preprogrammed set speed 6
10000 Preprogrammed set speed 7
10001 Preprogrammed set speed 8
10010 PTO set speed memory 1
10011 PTO set speed memory 2
10100-11110 not defined
11111 Not available
Off/Disabled 00000b — Used to indicate that the PTO governor enable switch is in the off
position.
Hold 00001b — used to indicate that the PTO governor is active and currently maintaining a
captured operating speed.
Remote Hold 00010b — used to indicate that the remote PTO governor is active and the PTO
governor is currently maintaining a captured operating speed.
Standby 00011b — used to indicate that the PTO governor device enable switch is in the ON
position and it is possible to manage the PTO governor.
Remote Standby 00100b — used to indicate that the remote PTO governor device enable switch
is in the ON position and it is possible to manage the PTO governor.
Set 00101b — Used to indicate that the PTO governor is establishing current speed as the
operating speed (captured value).
Decelerate/Coast 00110b — Used to indicate that the PTO governor is in the process of ramping
down, or coasting, from the current operating speed.
Resume 00111b — Used to indicate that the PTO governor is in the process of resuming the
operating speed to a previously captured value.
Accelerate 01000b — Used to indicate that the PTO governor is in the process of ramping up the
operating speed.
107
Advertisement
Table of Contents
