Getinfo; Deleterecords; Readio; Setdigout #### X Y Z W - Teltonika FM6320 User Manual

12.13

getinfo

Table 46 getinfo
Response details Description
INI Device Initialization Time
RTC RTC Time
RST Restart Counter
ERR Error Counter
SR Number of Sent Records
BR Number of broken records
CF Profile CRC Fail counter
FG Failed GPRS counter
FL Failed link counter
UT UPD Timeout counter
P# Current profile
#;#;#;#;# # - how many times appropriate profile ( Profile0; Profile1; Profile2;
Profile3; Profile4 ) was loaded
SMS Sent SMS Counter
NOGPS No GPS Timer
GPS GPS receiver state. 0 – OFF, 1 – restarting, 2 – ON but no fix, 3 – ON and
operational, 4 – sleep mode
SAT Average satellites
RS Reset Source Identification
RF Number of records found on FLASH
Answer Example: INI:2007/8/24 10:15 RTC:2007/8/24 12:43 RST:2 ERR:11 SR:182 BR:0 CF:0
FG:0 FL:0 UT: P:1;0;1;0;0;0 SMS:2 NOGPS:0:0 GPS:3 SAT:7 RS:7 RF:11
12.14

deleterecords

Deletes all saved records from device memory. Device does not send a response back to
the sender.
12.15

readio #

Table 47 readio #
Response details Description
ID IO element ID
Value IO Element value
Answer Example: IO ID:3 Value:0
12.16

setdigout #### X Y Z W

Sets digital outputs to ON or OFF state (for some time if needed). Value is written as a row
for OUT1, OUT2, OUT3, OUT4 values.
Example: 'setdigout 0010 0 0 5 0' will set OUT3 to high level for 5 seconds, while OUT1,
OUT3 and OUT4 to low level.
Ans. example: "DOUTS are set to:0010 TMOs are: 0 0 5 0. Out1 Scenario: Enabled Out2
Scenario: Disabled"
92