Features And Scenarios; Eco Driving/Green Driving Scenarios - Teltonika FM6320 User Manual

FM6320 can enter deep sleep mode (standby mode) if ALL of these conditions are met:
 FM6320 has to be configured to work in Deep Sleep mode;
 Start-up timeout has elapsed (5 minutes after every restart of the device);
 No movement by accelerometer is detected;
 Ignition is off;
 Send period is more than 60 seconds (Data Acquisition Mode settings);
 USB cable is not connected.
FM6320 exits deep sleep mode if ONE of the following conditions are true:
 Movement by accelerometer is detected (depends on accelerometer start settings);
 Ignition is turned on (driven logic high);
 USB cable is connected;
 HIGH or PANIC priority eventual record is detected;
While being in deep sleep mode FM6320:
 can save periodical or eventual records;
 send data to server;
Note: If there is no need to save or send periodical data FM6320 has to be
configured to switch to another profile on Deep Sleep Event where Min Period
and Send Period parameters are 0 or big enough.
Note: In order to save GPRS traffic records saved in deep sleep mode contain
below listed I/O elements information:
Digital Inputs (1-4), Analog Inputs (1-4), Battery Voltage, Battery Current,
Digital Outputs (1-4), External Voltage, Movement Sensor, Deep Sleep.
Also, Deep Sleep I/O is always LOW PRIORITY!
11

FEATURES AND SCENARIOS

11.1 ECO driving/Green driving Scenarios

Four scenarios are available on FM6320 device. All scenarios can be activated at the same
time and all activated scenarios can be configured to control the same DOUT (expect excessive
idling).
ECO driving/Green driving Scenarios. Helps to prevent and inspect
driver about harsh driving. Eco driving scenario continuously
monitors: accelerating, braking and cornering forces depending on
build in accelerometer or Green driving depending on GPS. The device
inspects driver if needed. Monitoring sensitivity is configurable.
Any of the four DOUT can be configured and then controlled by
scenario for user needs, buzzer or LED for example. Output activation
time after harsh event is also configurable.
77