Configuration (Windows) - Teltonika FMM230 First Start-Up Quick Start Manual

Configuration (Windows)

At first FMM230 device will have default factory settings set. These settings should be changed
according to the user's needs.
Main configuration can be performed via
Configurator version from here. Configurator operates on Microsoft Windows OS and uses
prerequisite MS .NET Framework. Make sure you have the correct version installed.
MS .NET requirements
MS .NET
Operating
Framework
system
version
• Windows MS .NET
Vista Framework
• Windows 4.6.2
7
• Windows
8.1
• Windows
10
Downloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe.
After launch software language can be changed by clicking
Configuration process begins by pressing on connected device:
After connection to Configurator Status window will be displayed:
Various Status window
FMM230 has one user editable profile, which can be loaded and saved to the device. After any
modification of configuration the changes need to be saved to device using Save to device button.
Main buttons offer following functionality:
1. Load from device – loads configuration from device.
2. Save to device – saves configuration to device.
Load from file – loads configuration from file.
3.
4. Save to file – saves configuration to file.
5. Update firmware – updates firmware on device.
6. Read records – read records from device.
Teltonika Configurator
Version Link
32 and www.microsoft.com
64 bit
tabs display information about GNSS, GSM, I/O,
software. Get the latest FMM230
in the right bottom corner:
Maintenance and etc.