In the following window click Install button.
4.
5.
Setup will continue installing the driver and eventually the confirmation window will appear.
Click Finish to complete the setup.
Note: on Windows 7 systems, an additional driver for FMM640 support must be installed. Driver can
be found here.
Configuration (Windows)
At first FMM640 device will have default factory settings set. These settings should be changed
according to the user's needs.
Main configuration can be performed via
Configurator version from here. Configurator operates on Microsoft Windows OS and uses
prerequisite MS .NET Framework. Make sure you have the correct version installed.
MS .NET requirements
Operatin
MS .NET
g system
Framework version
•
MS .NET Framework
Windows
4.6.2
Vista
•
Windows
7
•
Windows
8.1
•
Windows
10
Downloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe.
After launch software language can be changed by clicking
Configuration process begins by pressing on connected device:
After connection to Configurator Status window will be displayed:
Teltonika Configurator
Version Link
32 and
.NET
64 bit
Fram
ewor
k
software. Get the latest FMM640
in the right bottom corner: