Over Speeding Scenario; Excessive Idling; Jamming Detection; Trip - Teltonika FMB001 User Manual

• Ignition is ON (DIN1 = 1)
• Vehicle speed is equal or higher than 30km/h
Eco Driving or Green Driving? Eco driving works depending on accelerometer data and
Green driving uses GPS data.
Note: Green Driving and Eco Driving Scenarios are a factor on various cars and
various drivers testing phase and can be subject to changes. Teltonika is
constantly working on improvement of the functionality of the devices, and
strongly recommends using the latest version of the firmware.

4.4.2 Over Speeding Scenario.

Helps to prevent from exceeding fixed speed and inspects driver if needed.

4.4.3 Excessive Idling

Informs you if your vehicle is stationary but engine is on for selected period of time to help
you to save fuel

4.4.4 Jamming detection

Jamming detection shows when GSM signal jamming occurs.

4.4.5 Trip

Trip customizable feature enables user extended monitoring of performed trips (from
engine start at present location to engine stop at arrived location), log their start and stop points,
view driven total distance
starts and finishes.
Note: Scenarios and Trip feature are activated only if DIN1=1 (ignition is on).
4.5

Accelerometer scenarios

4.5.1 Excessive Idling
Informs you if your vehicle is stationary but engine is on for selected period of time to help
you to save fuel
3
Continuous odometer – total driven distance, works only in TRIP mode. Continues distance is counted only
for ONE trip. If trip is finnished (stop point is detected), odometer resets to 0 (zero). Next trip will start counting
from the begining.
3
. Event will be generated (included into send records) only when trip
21