High Capacity Stacker Sensor (Pass Through) Removal - Lexmark T652 Service Manual

4062-XXX
3. Unsnap each side of the deflector gate and remove.

High capacity stacker sensor (pass through) removal

1. Remove the rear door assembly. Go to
page 4-132.
2. Using needle-nose pliers or your finger, pull out and downward on the sensor (pass through) until the
sensor unsnaps.
3. Remove the high capacity controller card cover panel. Go to
cover panel removal" on page
4-144
Service Manual
"High capacity stacker rear door assembly removal" on
4-137.
"High capacity stacker controller card