High Capacity Stacker Sensor (Pass Through) Removal - Lexmark T650 Service Manual

3. Unsnap each side of the deflector gate and remove.

High capacity stacker sensor (pass through) removal

1. Remove the rear door assembly. Go to
page 4-134.
2. Using needle-nose pliers or your finger, pull out and downward on the sensor (pass through) until the
sensor unsnaps.
3. Remove the high capacity controller card cover panel. Go to
cover panel removal" on page
"High capacity stacker rear door assembly removal" on
4-138.
"High capacity stacker controller card
Repair Information
4062-XXX
Previous
Next
Go Back
4-145