LinkPoint AIO Reference Manual page 87

Pre-Print Receipt
♦ #PREPR, Pre-print receipt: Y or [N]
♦ Enable/Disable: Default = N
♦ Question max length 1 character
♦ Usage: Turns on or off pre-printing of receipts. If the parameter value is set to [Y]
then the terminal will pre-print the title, headers and the date and time before a
transaction is complete. The AIO terminal does not pre-print receipts regardless of
the parameter setting at this time.
Printer Line Feeds:
♦ #PRLF, Printer Line Feeds
♦ Numeric max length 4
♦ Usage: Controls number of blank lines between receipt copies.
Printer Enable Flag:
♦ #PRREC, Printer Enable: [Y] or N
♦ Enable/Disable (default = Y)
♦ Question max length 1 character
♦ Usage: Turns on or off printing of receipts and reports.
Auto Print Second Receipt
♦ #PRSEC, Auto print 2nd receipt [5 secs] 0=None
♦ Numeric max length 2, (default = 5)
♦ Usage: Sets how many seconds the terminal pauses before printing second receipt.
Printer Type Setting:
♦ #PRTYP, Printer Type [0]=PP3k,1=PP1k
♦ Numeric max length 1, (default = 0)
♦ Usage: Controls printer type setting for terminal.
Dialing Suffix Required:
♦ #PSUFF, Phone Suffix
♦ Phone characters: max length12 (default = empty)
♦ Usage: A suffix number is dialed after all processing phone numbers are dialed.
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
78 L4CGS33 Reference Manual