LinkPoint AIO Reference Manual page 267

Display Message
MUST CLOSE BATCH
BATCH FULL-CLOSE NOW
INVALID ACCOUNT #
CT
ENTER LAST 4 DIGITS
CT
MISMATCHED DIGITS
NNNNNNNNNNNNNNNNNNNN
IS CARD # CORRECT?
CT
ENTER EXP DATE MMYY
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
Operator Action and Comments
Displays for two seconds or until [ENTER] is
pressed.
state/prompt, if the batch is full or if the #BHRS
(number hours batch can be open) parameter is
enabled via download and the allotted time has
been exceeded.
Displays for two seconds, (terminal will beep) and
SALE
returns to idle prompt if the account number check
digit is not valid when card is swiped. If card number
is entered manually, it will prompt you to re-enter
account number.
Enter the last four digits of the card number.
SALE
Displays for two seconds (terminal will beep) and
SALE
returns to the previous prompt if the last four digits
keyed in do not match the last 4 digits from the
swiped account number.
Press [ENTER] (YES) to confirm the account
number embossed on card or press [BACK SPACE]
(NO) to return to the idle prompt. Displays if card is
swiped and the #SACCT (Confirm account number
on card swipe) download parameter is to [Y]
enabled.
Enter the expiration date. This will only be displayed
SALE
if the account number is manually keyed.
Terminal will
258 L4CGS33 Reference Manual
return to the idle