LinkPoint AIO Reference Manual page 146

Display Message
DB
ENTER CLERK ID
DIALING...
DB
DECLINE ERROR XX
DB
AP XXXXX SEQ XXX
DB
TEAR NOW,PRESS ENTER
DB
AP XXXXXXX SEQ XXX
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
Operator Action
Please enter the employee ID, then press [ENTER].
SALE
This prompt will appear if the #OPID parameter was
enabled.
Wait while terminal connects to the host. It will display
the communication status (DIALING...).
If the transaction is declined, an error code may
SALE
appear on the terminal display. If it appears on the
terminal display, it will print on the denied receipt
response line.
Displays if the transaction is approved. Please wait for
SALE
the receipt to print if the thermal printer is enabled.
Press [ENTER] to print the second receipt. Displays if
SALE
thermal printer is enabled and the second receipt timer
is not 00 and until [ENTER] is pressed or the second
receipt timer expires (if 99, wait 99 seconds).
Terminal will display the host reply information, then
SALE
will return to idle mode.
137 L4CGS33 Reference Manual