LinkPoint AIO Reference Manual page 234

Display Message
CT AUTH ONLY
IMPRINT CARD NOW!
CT AUTH ONLY
ENTER BASE AMOUNT
CT AUTH ONLY
CONFIRM AMOUNT
TOTAL $NNNNN.NN
IS THIS CORRECT?
CT AUTH ONLY
ENTER INVOICE #
CT AUTH ONLY
CUSTOMER CODE
CT AUTH ONLY
ENTER EMP ID
CT AUTH ONLY
COMM STATUS
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
Operator Action
Imprint card and press [ENTER]. This will only be
displayed if the account number is manually keyed and
card present is indicated ([YES] pressed above or CARD
PRESENT DEFAULT enabled).
Enter the base amount (including tax, unless tax is
prompted for separately but not including tip). Displays if
more than a single
PROCESSING enabled).
Enter the amount again. Displays if confirm parameter is
enabled and the amount entered is equal to or greater
then the confirm amount setting.
Press [ENTER] (YES) to confirm or press [BACK
SPACE] (NO) to return to ENTER BASE AMOUNT
prompt. Displays if more than one amount field applies.
Enter the invoice number. Displays if key invoice number
is enabled; otherwise an invoice number is generated
automatically.
Either enter the customer code, press [ENTER] to
bypass or press [CLEAR] to cancel the transaction.
Enter the employee ID (SERVER, CLERK, ...).
Displays if employee ID processing is enabled.
Displays comm
communicating with the host.
225
amount field applies
status (DIALING...)
L4CGS33 Reference Manual
(TIP
while