LinkPoint AIO Reference Manual page 60

TeleCheck ECA/CPO Prompt for Invoice:
♦ #1CAIN, TeleCheck Prompt for Invoice: Y or [N]
♦ Enable/Disable (default = disable)
♦ Usage: Controls whether the terminal prompts for an Invoice number during a check
transaction. Applies only for TeleCheck ECA/CPO check service.
TeleCheck Merchant ID:
♦ #1CAMI, TeleCheck Split Dial Merchant ID
♦ Supplied by TeleCheck
♦ Numeric max length 24
♦ Usage: A unique merchant number provided by TeleCheck used in TeleCheck split
dial ECA and standard check service configurations.
TeleCheck Split Dial Custom Field:
♦ #1CAMM, TeleCheck ECA Custom Field maX and miN length in "XXNN" format
[0000]
♦ Default [0000]
♦ Numeric Max Length 4, Numeric Min Length 4
♦ Numeric Field maX 2 characters which support the first two characters and sets the
maximum field length
♦ Numeric Field miN 2 characters which support the last two characters and sets the
minimum field length
♦ Usage: Used only in TeleCheck split dial ECA check services as an optional data
entry field for additional information such as a receipt number.
TeleCheck BCN Minimum Length:
♦ #1CAMN, TeleCheck BCN min
♦ Numeric, max length 2, max value '24' (default = '00')
♦ Usage: Used in TeleCheck ECA CPO and Split Dial check services; controls
minimum number of characters required for entering into the terminal the billing
control number. This setting is provided by the host.
TeleCheck BCN Maximum Length:
♦ #1CAMX, TeleCheck BCN max
♦ Numeric, max length 2, max value '24' (default = '00')
♦ Usage: Used in TeleCheck ECA CPO and split dial check services; controls
maximum number of characters required for entering into the terminal the Billing
Control Number. This setting is provided by the host.
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
51 L4CGS33 Reference Manual