Page 2
No part of this publication may be copied, distributed, stored in a retrieval system, translated into any human or computer language, transmitted, in any form or by any means, without the prior written consent of LinkPoint International, Inc. LinkPoint International reserves the right to make changes to this document and the products it describes without notice.
For safety, the LinkPoint 3000 terminal must be serviced by only LinkPoint International or its representatives. ♦ Do not operate the LinkPoint 3000 terminal until you have been trained by your sales representative. ♦ Operate the terminal according to the instructions in this manual.
GETTING STARTED GETTING STARTED Introduction Congratulations on your choice of the LinkPoint 3000 point-of-sale (POS) terminal (see Figure 1). Scientifically engineered to exceed the quality found in current terminal technology, the LinkPoint 3000 combines user-friendly operation with “soft,” programmable functions. The screen-addressable keys and the innovative backlit display panel make terminal operation quick and easy.
Do not try to use a damaged terminal! To unpack the LinkPoint 3000: With the shipping carton right side up, open the carton’s lid. Lift the terminal, its AC adapter and line cord with modular plugs up and out of the box.
GETTING STARTED Installation Installing the LinkPoint 3000 terminal is simple and requires no tools. Connect the AC adapter to the power input at the rear of the LinkPoint 3000 terminal (see Figure 3). Figure 3 Plug the adapter into a 120V electrical outlet or into a surge suppressor (see Figure 4).
GETTING STARTED Figure 5 If you are using a printer with your LinkPoint 3000 terminal, see the manual packaged with your printer for installation and operating instructions. When the terminal is plugged in, it will display an idle message (i.e., App.
TERMINAL FEATURES The Display Panel Each LinkPoint 3000 terminal has a built-in display panel capable of showing up to 20 letters or numbers (see Figure 6). The two-line, 20- character display panel is backlit to enhance readability, and it easily accommodates most messages.
Figure 8 LinkPoint 3000 Keypad With Overlay As Figure 8 illustrates, the LinkPoint 3000 terminal keypad has 30 keys that can be used to select numbers, letters or functions, or to enter data. During transactions, use the number keys and the “soft” [ ] keys to respond to prompts or to enter alphanumeric data.
BASIC OPERATION BASIC OPERATION Download The LinkPoint 3000 terminal may or may not have an application pre- downloaded. To download an application, please contact your sales or service representative. Transaction Keys The LinkPoint 3000 has seven transaction keys and three screen-addressable, “soft”...
BASIC OPERATION Entering Alphanumeric Data From the Keypad The LinkPoint 3000 keypad has 30 keys that can be used to enter as many as 47 different alphanumeric characters. These characters are the letters A through Z, the numerals 0 through 9, and the following special characters: + * , ‘...
Need help?
Do you have a question about the 3000 and is the answer not in the manual?
Questions and answers