LinkPoint AIO Reference Manual page 409

Display Message
TIP:
ENTER AMT TO CHANGE
TAX: $nnnnn.nn
ENTER AMT TO CHANGE
nnn: TOTAL
OK EDIT
SEQ #nnn UPDATED
Prnt EMP nnn Rpt?
YES NO
Repeat the following steps for the selected transaction if a close tab is initiated from a
batch close, as shown in the example below.
Display Message
SWIPE CARD FOR SALE
mm-dd-yy ddd hh:mm
ENTER PASSWORD
Close Batch #n
PRINTING...
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
Operator Action
Press [ENTER] or enter new tip amount to change. This
$0.00
is displayed If tip processing is enabled (host option).
Press [ENTER] or enter new tax amount to change.
(This is displayed If tax entry applies).
If the transaction total is correct, press the left [
$n.nn
not, press the right [
amount further.
Please wait for the updated transaction receipt to print.
Press the left [
right [
EMP screen.
Operator Action
Press [CLOSE] when tab processing is enabled.
Key in the password and press [ENTER].
Please wait...
Please wait...
] key to edit the transaction
] key to print an employee report or the
] key to bypass. Terminal returns to INV SEQ
400 L4CGS33 Reference Manual
] key, if