LinkPoint AIO Reference Manual page 211

Display Message
TELECHECK ECA
MICR NUMBER AGAIN
ENTRIES
DO NOT MATCH
ERROR
DUPLICATE CHECK
TELECHECK ECA
ENTER CHECK #
TELECHECK ECA
PERSONAL/BUSINESS
TELECHECK ECA
ENTER CHECK AMOUNT
TELECHECK ECA
REENTER CHECK AMOUNT
TELECHECK ECA
SWIPE/ENTER DLN/ID#
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
Operator Action
Displays if manual entry and verify manual MICR
(#1CADK) option is enabled. When prompted please
enter MICR information from bottom of check again,
then press [ENTER].
Displays if re-keyed or re-read MICR does not match
original data. Displays for two seconds (beep) and
returns to INSERT CHECK prompt.
Displays if Duplicate Check Checking Indicator
(#1CADM) option is enabled and if the check read
through the check reader and raw MICR data
matches raw MICR data from another non-voided
transaction in the batch. Displays for two seconds and
returns to SLIDE CHECK prompt.
Manual Entry:
Displays when the MICR is successfully entered. Key
in the check number and press [ENTER].
If the check is personal, press the left [ ] key, press
the right [ ] key to processing a business check.
Key in the amount of the check and press [ENTER].
Displays if amount confirmation option is enabled and
if the amount entered is the same or more than the
amount entered in the (#CNFRM) parameter. Key in
the same amount again to confirm and press
[ENTER].
Displays if the MICR data was manually keyed or if
the amount entered is greater than or equal to the
MICR/Second ID Floor Limit (#1KFLR) parameter.
Swipe the driver's license or enter the license/ID
number and press [ENTER].
202 L4CGS33 Reference Manual