LinkPoint AIO Reference Manual page 84

Mask Merchant ID on Receipt:
♦ #MASKM, Mask MID on receipt Y or [N]
♦ Enable/Disable (default = disable)
♦ Question max length 1 character
♦ Usage: Turns on or off the masking of the merchant ID number on customer receipt
copy. If the merchant ID is masked only the last 8 digits are printed.
Mask Credit Card Information on Merchant Receipt
♦ #MASKA, Mask Info on Merchant receipt Y or [N]
♦ Enable/Disable (default = disable)
♦ Question max length 1 character
♦ Usage: Turns on or off the masking of the credit card number and conceals the card
expiration date on the merchant copy of the receipt. If the card number is masked
only the last four digits are printed on the merchant copy of the receipt. If the card
expiration date is concealed it will not be printed on the merchant copy of the receipt.
Master Key Location for PIN Pads
♦ #MKEY, Master Key Location for PIN pad
♦ Numeric max length 1 (default = 1)
♦ Usage: Sets the master key information for PIN pad programming and only used for
Master Session encrypted PIN pads. Not currently used for this application, may be
use in future.
Operator ID
♦ #OPID, Prompt for Employee ID: Y or [N]
♦ Enable/Disable (default = disable)
♦ Question max length 1 character
♦ Usage: Turns on of off the ENTER EMP ID prompt during card and check type
transactions. If prompt is enabled, it cannot be bypassed by pressing [ENTER].
Dialing Prefix
♦ #PABX, Phone Prefix
♦ Phone characters: max length 12 (default = empty)
♦ Usage: The Prefix number is dialed before dialing the phone numbers.
Number of TeleCheck Check Receipts to Print:
♦ #PCHKR, Number of Check Receipts: [2]
♦ Numeric max length 1 (default = 2)
♦ Usage: Controls the number of TeleCheck ECA printed receipts per transaction.
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
75 L4CGS33 Reference Manual