LinkPoint AIO Reference Manual page 252

Display Message
BATCH FULL-CLOSE NOW
MUST CLOSE BATCH
RETURN
INVALID ACCOUNT #
CT
ENTER LAST 4 DIGITS
CT
MISMATCHED DIGITS
NNNNNNNNNNNNNNNNNNNN
IS CARD # CORRECT?
CT
ENTER EXP DATE-MMYY
CT
INVALID DATE
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
Operator Action
Displays for two seconds or until [ENTER] pressed and
return to the idle state/prompt, if the batch is full or if the
#BHRS (number hours batch can be open) parameter is
enabled via download and the allotted time has been
exceeded.
Displays for two seconds (beep) and return to idle
prompt if the account number check digit is not valid
when card is swipe. If card is keyed, it will prompt to re-
enter account number.
Enter the last four digits of the card number. Displays if
RETURN
card is swiped and the #L4DIG parameter is enabled via
download.
Displays for two seconds (beep) and returns to the
RETURN
previous prompt if the digits keyed in do not match the
last 4 digits of the swiped account number.
Press [ENTER] (YES) to confirm account number
embossed on card or press [BACK SPACE] (NO) to
return to the idle prompt. Displays if card is swiped and
the #SACCT (confirm account number on card swipe)
parameter is enabled via the download.
Enter the expiration date. This will only be displayed if
RETURN
the account number is manually keyed.
Displays for two seconds (beep) and return to enter exp.
RETURN
date. This is displayed if the date entered is not a valid
month/year combination.
243 L4CGS33 Reference Manual