LinkPoint AIO Reference Manual page 58

Check Writer's Address Lines:
♦ #1CAAL, TeleCheck Print Check Writer's Address, City, State, Zip: Y or [N]
♦ Enable/Disable (default = disable)
♦ Usage: Turns on or off printing of the check writer's street address line and city, state
and zip code line on the TeleCheck ECA approved receipt. These lines will provide
the consumer two lines to write in their street address, city, state and zip code.
Auto Determine Check Type:
♦ #1CAAT, TeleCheck Auto-determine Check Type [Y] or N
♦ Enable/Disable (default = enable)
♦ Usage: Controls whether the terminal auto determines check type "personal" or "not
personal" based on the check MICR read data.
BCN (Billing Control Number) Prompt:
♦ #1CABC, TeleCheck Prompt for BCN: Y or [N]
♦ Enable/Disable (default = disable)
♦ Usage: Controls whether the terminal prompts for a billing control number.
TeleCheck BCN Prompt:
♦ #1CABP, TeleCheck BCN Prompt
♦ Default is left empty
♦ Alphanumeric Max length 16 characters
♦ Usage: Contains the text display message for the BCN prompt when the billing
control number prompt is on. This setting is provided by the host.
Prompt for Check Cash Back:
♦ #1CACB, TeleCheck Prompt for Cash Back Amount: Y or [N]
♦ Enable/Disable (default = disable)
♦ Usage: Prompts for cash back amount on standard check service.
TeleCheck Split Dial ECA Custom Field Tag:
♦ #1CACT, TeleCheck ECA Split Dial Custom Field Tag
♦ Default is left empty
♦ Alphanumeric Max length 4 characters
♦ Usage: Used only in ECA split dial as the custom field identifier tag.
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
49 L4CGS33 Reference Manual