LinkPoint AIO Reference Manual page 233

Display Message
CT AUTH ONLY
INVALID ACCOUNT #
AUTH ONLY
CLOSE SOON!
CT AUTH ONLY
ENTER LAST 4 DIGITS
CT AUTH ONLY
MISMATCHED DIGITS
NNNNNNNNNNNNNNNNNNNN
IS CARD # CORRECT?
CT AUTH ONLY
ENTER EXP DATE-MMYY
CT AUTH ONLY
INVALID DATE
CT AUTH ONLY
EXPIRED CARD
CT AUTH ONLY
IS CARD PRESENT?
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
Operator Action
Displays for two seconds (beep) and returns to idle
prompt if the account number check digit is not valid
when card is swiped. If card number is entered
manually, it will prompt you to re-enter account number.
Displays for two seconds or until [ENTER] pressed if the
number of stored records exceeds 90% of total capacity.
(NNN)
Enter the last four digits of the card number. Displays if
card is swiped and the #L4DIG parameter is enabled via
download.
Displays for two seconds (beep) and returns to the
previous prompt if the digits keyed in do not match the
last 4 digits from the swiped account number.
Press [ENTER] (YES) to confirm account number
embossed on card or press [BACK SPACE] (NO) to
return to the idle prompt. Displays if card is swiped and
the #SACCT (Confirm account number on card swipe)
parameter is enabled via the download.
Enter the expiration date. This will only be displayed if
the account number is manually keyed.
Displays for two seconds (beep) and return to enter
expiration date. This is displayed if the date entered is
not a valid month/year combination.
Displays for two seconds (beep) and returns to idle
prompt. This is displayed if the expiration date is expired.
Press [ENTER] (YES) if the card is present or [BACK
SPACE] (NO) if the card is not present. This will only be
displayed if the account number is manually keyed and
the bypass card present option is disabled.
224 L4CGS33 Reference Manual