LinkPoint AIO Reference Manual page 299

Display Message
SALE
ENTER ACCOUNT #
DB SALE
FUEL AMNT
DB SALE
CONFIRM AMOUNT
FUEL GRADE
FUEL GRADE
1=REGULAR
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
Operator Action and Comments
Swipe the card through the card reader.
Key in the amount of the Petroleum transaction and
press [ENTER] or press [ENTER] to bypass.
Key in the transaction amount again and press
[ENTER]. The amount must match the amount
entered for the Petroleum transaction or the terminal
will return to the previous prompt so the amount can
be entered again.
Terminal will alternately display FUEL GRADE if the
fuel grades have not been entered.
Fuel entry not allowed until fuel grades have been
entered. Proceed to FUEL SETUP for instructions.
Terminal will alternately display all the fuel grade
descriptions. Select the grade of fuel by pressing the
corresponding numeric [1] to [5] key.
Special note:
If a non-valid entry the terminal will beep and return
to the FUEL GRADE screen. If the fuel amount is
not greater than zero or is bypassed, the terminal
will not display this screen. A valid fuel grade entry
is required.
290 L4CGS33 Reference Manual