LinkPoint AIO Reference Manual page 20

REVIEW (I ;)
REVIEW is used to initiate the various batch total and detail review functions, is used to
enter a ';' (semicolon) symbol, or is used along with the [ALPHA] key to enter the letter
'I'.
CLOSE (J @)
CLOSE is used to initiate a batch close or settlement session, is used to enter an '@'
symbol, or is used along with the [ALPHA] key to enter the letter 'J'.
0,1,2,3,4,5,6,7,8,9 (X K L M O P Q S T U)
These keys are used to enter the numerals 0-9 respectively or are used along with the
[ALPHA] key to enter the letters X, K, L, M, O, P, Q, S, T, U, respectively. Pressing the
[0] key at the idle state invokes the calculator.
∗ (
W)
This key is used to enter the '*' symbol, is used along with the [ALPHA] key to enter the
letter 'W' and is used to view additional screens (left scroll) of data (e.g. for viewing
transaction detail where multiple screens of data apply).
# ( Y)
This key is used to enter the '#' symbol, is used along with the [ALPHA] key to enter the
letter 'Y' and is used to view additional screens (right scroll) of data (e.g. for viewing
transaction detail where multiple screens of data apply).
÷ [N '(' PRINT]
This key is used to indicate division when in calculator mode, is used to enter a '('
symbol, is used along with the [ALPHA] key to enter the letter 'N' and is used to initiate
the various print report and reprint functions.
X [R ')' AUTH ONLY]
This key is used to indicate multiplication when in calculator mode, is used to enter a ')'
symbol, is used along with the [ALPHA] key to enter the letter R and is used to initiate an
auth only transaction that is authorized but not captured to the current batch.
© 2003 LinkPoint International, Inc. 11 L4CGS33 Reference Manual
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.