LinkPoint AIO Reference Manual page 105

Display Message
AP0 L4CGS33
Delete? No Yes
Download Set port
Select download port
Modem RS232
RS232 setup
Baud Parity
Current baud:19200
1200 2400 9600
RS232 setup
Baud Parity
Current parity: None
Even None Odd
Download Set port
Enter Appl. ID.
L4CGS33
Enter Terminal ID.
_
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
Operator Action
If delete, press the right [
[ ] for NO.
Press the right [ ] key to select SET PORT.
Press the right [ ] key to select RS232.
Press the left [ ] key to select BAUD.
To keep the current baud rate, press [CLEAR]. To choose
a different baud rate, press the [#] key or [*] key to scroll
until you see the rate you wish to choose. When you see
that rate, press the [
[CLEAR]. It is recommended that that you choose the
highest rate your computer can support.
Press the right [ ] key to select PARITY.
Select the correct parity (default is None). Press the [
key below your choice and press [CLEAR] three times.
Press the left [ ] key to select DOWNLOAD.
Key in the application ID and press [ENTER]. Press
[ALPHA], then the appropriate key to add letters.
Key in the terminal ID and press [ENTER].
96
] key to select YES or the left
] key under the rate then press
L4CGS33 Reference Manual
]