LinkPoint AIO Reference Manual page 316

Display Message
ENTRIES DO NOT MATCH
FUEL GRADE
FUEL GRADE
1=REGULAR
2=SPECIAL
3=SUPER
© 2003 LinkPoint International, Inc.
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the
expressed, written consent of LinkPoint International is prohibited.
Operator Action and Comments
Displays if re-keyed amount does not match original.
Displays for two seconds and returns to FUEL
AMOUNT prompt.
Terminal will alternately display FUEL GRADE if the
fuel grades have not been entered.
Special note:
Entry requirements:
Min = bypass [ENTER] only allowed.
Max = none
Fuel entry not allowed until fuel grades have been
entered. Proceed to FUEL SETUP for instructions.
Bypass allows a
transaction.
Terminal will alternately display all the fuel grade
descriptions. Select the grade of fuel by pressing the
corresponding numeric [1] to [5] key.
Special note: After a non-valid entry the terminal will
beep and return to the FUEL GRADE screen. If the
fuel amount is not greater than zero or is bypassed,
the terminal will not display this screen. A valid fuel
grade entry is required.
Terminal will alternately display all the fuel grade
descriptions. Select the grade of fuel by pressing the
corresponding numeric [1] to [5] key.
Special note: After a non-valid entry the terminal will
beep and return to the FUEL GRADE screen. If the
fuel amount is not greater than zero or is bypassed,
the terminal will not display this screen. A valid fuel
grade entry is required.
307
Miscellaneous (non-fuel)
L4CGS33 Reference Manual
type