Starting Web Maintenance Console - Panasonic KX-NS1000 Getting Started

3.3 Starting Web Maintenance Console

System Requirements
For the system requirements of the PC (operating system, hardware specifications, supported browsers etc.),
refer to "5.3 Starting Web Maintenance Console" in the Installation Manual.
Copyright for MD5
This software uses the Source Code of RSA Data Security, Inc. described in the RFC1321 (MD5
Message-Digest Algorithm).
Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved.
Licence to copy and use this software is granted provided that it is identified as the "RSA Data Security, Inc.
MD5 Message-Digest Algorithm" in all material mentioning or referencing this software or this function.
Licence is also granted to make and use derivative works provided that such works are identified as "derived
from the RSA Data Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or referencing the
derived work.
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or
the suitability of this software for any particular purpose. It is provided "as is" without express or implied warranty
of any kind.
These notices must be retained in any copies of any part of this documentation and/or software.
Password Security
CAUTION
To the Administrator or Installer regarding the system password
1.
Please provide all system passwords to the customer.
2.
To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and inform
the customer of the importance of the passwords, and the possible dangers if they become known to
others.
3.
The PBX has default passwords preset. For security, change these passwords the first time that you
programme the PBX.
4.
Change the passwords periodically.
5.
It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorised access. For a list of numbers and characters that can be used in system
passwords, refer to "1.1.3 Entering Characters" in the PC Programming Manual.
Connecting to Web Maintenance Console
Note
The contents and design of the software are subject to change without notice.
1.
Connect the PC to the PBX:
•
Connect the PBX to a PC with the MNT port and access the PBX directly from the PC. For details, refer
to "Direct Connection" in "3.2 Connecting the PC".
•
Connect the PBX to a network with the LAN port and access the PBX from a PC in your LAN. For
details, refer to "4.10.1 LAN Connection for the Main Unit" in the Installation Manual.
3.3 Starting Web Maintenance Console
Getting Started 25