Obtain Wp820 Ip Address; Wp820 Web Gui Access Configuration; Configuration Via Web Browser - Grandstream Networks WP820 Administration Manual

Hide thumbs Also See for WP820:
Table of Contents

Advertisement

If  you receive a Wi-Fi association reject message from AP, it will show Disabled on available WI-FI networks, and this is not set
or configured at WP820 side, the possible reasons are: blacklisted by AP, open band steering or load balance on AP, reach max
connection limit of AP, etc...

Obtain WP820 IP Address

In order to know which IP address is assigned to your WP820, please follow below steps:
1. Unlock first your WP820 and press "Menu"(Middle softkey) or Ok button to view operation menu.
2. Press Arrow (Up, Down, Left, Right) keys to move the cursor to Status icon
button.
3. Access Network Status menu to obtain the IP address of the WP820.

WP820 WEB GUI ACCESS CONFIGURATION

The WP820 can be configured using:
Web GUI embedded on the WP820 using PC's web browser.
LCD Configuration Menu using the WP820 keypad.
Note: From the Web GUI, you can configure all the functions supported by the WP820; while via keypad menu, you can access
limited configuration.

Configuration via Web Browser

The WP820 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow a user to
configure the WP820 through a Web browser such as Google Chrome, Mozilla Firefox.
Note: Please note that Microsoft's IE 9 and below are not supported, also the records from the web cannot be played with
IE10, Edge and Safari. We highly recommend using Google Chrome or Mozilla Firefox.
Accessing the Web UI
1. Connect the computer to the same network as WP820.
2. Make sure the WP820 is booted up and powered correctly.
3. You may check WP820 IP address via a subscribed WP820 on its LCD menu Settings �� Network Status. Please see
[WP820 Network Status]
4. Open Web browser on your computer and enter the WP820 IP address in the address bar of the browser.
5. Enter the administrator's username and password to access the Web Configuration Menu.
Note
Figure 7: Obtaining IP Address
 , then press "Select" (left softkey) or Ok

Advertisement

Table of Contents
loading

Table of Contents