GE D90 Plus Instruction Manual page 89

Line distance protection system

Hide thumbs Also See for D90 Plus:

Table of Contents

CHAPTER 4: FRONT PANEL INTERFACE

LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL

The configured IP protocol values display for each of the available Ethernet ports. Ethernet

port 1 is the port on the main CPU card in slot D, while port 2 is located at the top of the slot

C communications processor and port 3 at the bottom. The displayed MAC address is for

Ethernet port 1. The MAC address of Ethernet port 2 is the MAC address of Ethernet port 1

incremented by 1. The MAC address of Ethernet port 3 is the MAC address of Ethernet port

1 incremented by 2.

Figure 60: Communication status page