Digital Fault Recorder; Sequence Of Events Recorder - GE D90 Plus Instruction Manual
Line distance protection system
Hide thumbs
Also See for D90 Plus:
- Instruction manual (694 pages) ,
- Communications manual (222 pages) ,
- Instruction manual (602 pages)
Table of Contents
Advertisement
D90
Chapter 10: Digital fault recorder
Sequence of events recorder
Front panel operation
PLUS
D90
LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
Plus
Line Distance Protection System
Digital fault recorder
The digital fault recorder (DFR) captures detailed information regarding abnormal
occurrences in the power system. The information captured by the DFR is stored in the
Plus
D90
in non-volatile memory and can be accessed through the front panel interface. The
DFR consists of the following four functions:
•
An event recorder that provides a time-stamped record of the operation of breakers,
protection elements, and alarms. Event recording is enabled on a per-element basis.
•
A fault report that records fault type, magnitude, and duration of the fault, and the
response of protection functions
•
A transient recorder that records analog and digital signals for short duration events
at a high resolution
•
A disturbance recorder that records analog and digital signals for long duration
events, such as power swings and voltage sags, at a resolution of one sample per
cycle
This event recorder provides a time-stamped record of state changes of signals monitored
Plus
by the D90
. These signals include the state of circuit breakers and disconnect switches,
external alarms and indications, and any of the internal functions of the IED. The
Plus
D90
can store a total of 8192 events. Once this memory is filled, the oldest events are
overwritten.
Plus
Most D90
elements contain an
changes for FlexLogic operands associated with the element are written to the event
recorder. If this setting is disabled then state changes for the element are not recorded.
The sequence of events record can be accessed from the front panel through the digital
fault recorder (DFR) page. Using the navigation keys, the user can scroll or page through
the events list. Two cursors are provided for measurement of the time difference between
events.
setting. When this setting is enabled, state
Events
505
Advertisement
Table of Contents
