Add A New User - GE D90 Plus Instruction Manual

ENERVISTA SECURITY MANAGEMENT SYSTEM
NOTE:

Add a new user

614
2. Enable the Enable Security check box in the lower-left corner to enable the security
management system.
3. Click the Ok button.
Security is now enabled for the EnerVista software. Upon starting the software, users are
now required to enter a username and password.
If you force password entry by using this feature, ensure that you know the Administrator
password. If you do not know the password and are locked out of the software, contact GE
Digital Energy for the default password.
The following pre-requisites are required to add user accounts to the EnerVista security
management system:
• The user adding the account must have administrator rights
• The EnerVista security management system must be enabled (previous section)
To add a user account:
1. Select the Security > User Management menu from the top menu to open the user
management window.
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 13: SECURITY