Shared Equipment Manager Operands - GE D90 Plus Instruction Manual

Line distance protection system

Hide thumbs Also See for D90 Plus:

Table of Contents

CHAPTER 9: EQUIPMENT MANAGER

Shared equipment manager operands

LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL

Figure 435: Default operand list by function

The content of each operand list depends on the order code.

The shared operands functionality expands upon this system. An output from any element

can be assigned as a shared operand within the EnerVista UR

signals then can be assigned as inputs to other functions.

For example, assume that the

within the automation function. This operand then is assigned as a shared operand and

subsequently becomes available to the automation function. A total of 64 operands can be

assigned as shared operands within each function.

Select the Settings > Equipment Manager > Shared Operands menu to select the shared

equipment manager operands.

USING SHARED OPERANDS IN EQUIPMENT MANAGER

protection operand is required as a signal

Setup software. These