Metering Blocks - GE D90 Plus Instruction Manual

Line distance protection system

Hide thumbs Also See for D90 Plus:

Table of Contents

CHAPTER 12: LOCAL INTERFACE

Metering blocks

LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL

Figure 518: Mimic diagram editor static symbols

For more information on these symbols, see the ANSI/IEEE 315A and IEC 617 standards.

There is no limit on the number of static symbols per screen, provided that they fit within

the screen dimensions.

When a static symbol is selected and added to the diagram, a window appears to

configure the device. This allows the user to specify the orientation of the device; the name

of a static device cannot be changed. The figure shows the transformer properties device

configuration window.

Figure 519: Transformer properties device configuration window

Metering blocks can display various metered quantities. They allow the user to display

specific analog values in the mimic diagram. The table outlines the metered text block

type. A maximum of six metering blocks can be used per mimic diagram page.

MIMIC DIAGRAM EDITOR