CHAPTER 11: METERING
Customizing the metering logic operands
PLUS
D90
LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
Figure 505: Shared operands configuration window
The left side of this screen displays all D90
function as shared operands. Select any operands from the other five primary features by
clicking the >> button. Operands can be de-assigned as shared operands by clicking the
<< button.
Select the Settings > Configure FlexOperands menu to open the user-configurable
operands window.
USING SHARED OPERANDS IN METERING
Plus
operands that are available to the metering
575